Single-stage bottle molding

50-V5 Three-Station ISBM Machine

The 50-V5 integrates preform injection, stretch blowing and take-out in a three-station machine. Its selection table covers one to six cavities, with a different bottle envelope for each arrangement.

Evaluate the actual cavity row against your container drawing before choosing the mold configuration.

50-V5Three-station configuration
50-V5 three-station injection stretch blow molding machine
Machine dimensions: 3.4 × 1.2 × 2.5 mView larger image ↗
Process stations
3
Cavity references
1 ~ 6
Screw diameter
35 mm
Theoretical injection volume
130 cm³
Model overview

Match the Bottle to the Cavity Layout

The one-cavity reference lists a maximum body diameter of 90 mm and a 60 mm neck. At six cavities, the corresponding reference is a 28 mm body diameter and a 17 mm neck. The listed maximum bottle height is 200 mm.

These are configuration-dependent limits. Each cavity arrangement needs its own bottle and mold assessment.

Compare all six bottle-layout references →

  1. Preform Injection

    Form the preform for the selected bottle and mold arrangement.

  2. Stretch Blowing

    Stretch and blow the preform into the container.

  3. Take-out

    Remove the container through the configured take-out sequence.

Technical data

50-V5 Machine Specifications

Review the injection unit, station movements and machine envelope together when defining the proposed mold and production configuration.

Machine

Parameter Specification
Stations 3
Installed power 20 kW
Dimensions, L × W × H 3.4 × 1.2 × 2.5 m
Machine weight 3.5 t

Injection Unit

Parameter Specification
Screw diameter 35 mm
Theoretical injection volume 130 cm³
Injection rate 90 cm³/s
Injection pressure 160 MPa
Screw rotation speed 0–200 rpm

Station and Mold Movements

Parameter Specification
Injection clamping force 100 kN
Injection upper stroke 450 mm
Injection lower stroke 225 mm
Blow clamping force 70 kN
Blow core stroke 200 mm
Blow mold opening stroke 70 mm
Take-out stroke 100 mm

Installed power is used for electrical planning. Operating consumption must be measured for the agreed bottle, mold and auxiliary equipment.

Evaluate the proposed mold with the injection specification. The 35 mm screw, 130 cm³ theoretical injection volume, 90 cm³/s injection rate and 160 MPa injection pressure describe the injection unit. The tool proposal should connect bottle weight to the total shot requirement and identify the cycle used to calculate finished-bottle output.

Bottle configuration

One to Six Cavities, with Matched Bottle Limits

Read each row as one configuration reference. Body diameter, neck size, height and weight from different rows must not be combined.

Swipe horizontally to view all columns.

Cavities Body diametermm Bottle heightmm Neck sizemm Bottle weightg
1 90 200 60 105
2 80 200 38 50
3 64 200 30 35
4 45 200 27 28
5 35 200 20 22
6 28 200 17 18

Catalog configuration references. Final suitability depends on the complete bottle, preform and mold design. The six-cavity reference applies to a smaller container than the one-cavity reference.

Project planning

Check Tooling Clearance and Installation Space

Use the machine dimensions and movement data to review the complete working cell, including tool access and container removal.

A Defined Starting Point for Compact Layouts

The 50-V5 combines a 3.4 m machine length with a 1.2 m width and a 2.5 m height. These dimensions help your production team begin its layout study alongside material preparation, cooling equipment and container handling.

The machine envelope is only part of the working cell. Allow access to the mold, injection unit and service connections, including the path used to remove a mold.

Length
3.4 m
Width
1.2 m
Height
2.5 m

Match Clearance as Well as Bottle Dimensions

The injection station lists 450 mm of upper stroke and 225 mm of lower stroke. The blow station lists a 200 mm core stroke and a 70 mm mold opening stroke, followed by a 100 mm take-out stroke.

These dimensions describe different machine movements. Check preform tooling, neck handling and the removal sequence against the machine interface drawing, even when the finished bottle fits a listed size row.

Related model

Compare the Injection Unit with the 50-S6

A similar bottle-size table does not establish identical injection capability or operating costs. The two models have different injection-unit specifications and strokes, so the tooling needs a separate review.

Injection specification 50-V5 50-S6
Screw diameter 35 mm 36 mm
Theoretical injection volume 130 cm³ 146 cm³
Model questions

Questions About the 50-V5

Clarify the cavity references, electrical rating and comparison points before requesting a machine configuration.

Does the six-cavity entry apply to the largest bottle?

No. The six-cavity row lists a 28 mm body and a 17 mm neck, while the one-cavity row lists 90 mm and 60 mm. Each row describes a different configuration.

Is the 20 kW figure the running electricity consumption?

It is the catalog installed-power figure. Operating consumption needs a measurement for the agreed bottle, mold and auxiliaries; it cannot be calculated from that figure alone.

What distinguishes this model from the 50-S6?

The catalog injection units differ: 50-V5 lists a 35 mm screw and 130 cm³ theoretical injection volume, whereas 50-S6 lists 36 mm and 146 cm³. Their injection strokes also differ, so tooling needs separate review.

Discuss your bottle project

Request a 50-V5 Configuration

Send your bottle requirements for a quotation covering the injection unit, mold cavitation, utility requirements and included auxiliary equipment.

  • Bottle drawing and neck finish
  • Resin grade and target bottle weight
  • Required accepted bottles per hour
  • Existing mold information, if applicable
  • Available space and local power supply

Include a drawing link in your message, or email your drawing to info@isbmmachine.net.

Cycle time and accepted output should be established using the proposed bottle and mold.

Your 50-V5 Enquiry

    We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
    Accept